Golf Mk5
Note
|
| 1 - | H.T. cable |
| q | 4…8 kΩ. |
| q | With suppression connector and spark plug connector. |
| q | Check for continuity. |
| q | Pull off sparkplug connector using puller -T10112-. |
| 2 - | Ignition transformer -N152- |
| q | Markings for H.T. cables: A = Cylinder 1, B = Cylinder 2, C = Cylinder 3, D = Cylinder 4 |
| q | To remove or install, remove secondary air pump and bracket for secondary air pump |
| 3 - | 10 Nm |
| 4 - | Connector |
| q | 4-pin. |
| q | For ignition transformer -N152-. |
| 5 - | Spark plug, 25 Nm |
| q | Type and electrode gap → Chapter. |
| q | To remove and install, pull off connectors for outer injectors. |
| q | Remove and install with spark plug spanner -3122 B-. |
| 6 - | 2-pin connector |
| q | For knock sensor 1 -G61-. |
| q | Contacts gold plated. |
| 7 - | 20 Nm |
| q | The torque setting influences the function of the knock sensor. |
| 8 - | Knock sensor 1 -G61- |
| q | Contacts gold plated. |
| 9 - | 10 Nm |
| 10 - | Hall sender -G40- |
| q | Contacts gold plated. |
| q | Fitting location: on cylinder head below throttle valve module -J338- → Item |
| q | To remove or install, remove throttle valve module -J338- |
| 11 - | Connector |
| q | For Hall sender -G40-. |
| q | Contacts gold plated. |
| 12 - | O-ring |
