–
| Use torque wrench -V.A.G 1331- and insert tool -T10360- to loosen bolt -1- on coolant pump drive sprocket clockwise. To do this, counterhold at vibration damper from above, using hexagon socket insert AF 24. |
–
| Undo and remove bolt. Detach drive sprocket -1- and toothed belt -2-. |
Installation is carried out in the reverse order; note the following: |
–
| Renew drive sprocket bolt. |
–
| Renew gaskets, seals and O-rings. |
Installation position of drive gear: Collar on drive gear faces gearbox. |
|
|
|