volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fanV7 and radiator fan 2V177 > < Installing radiator identification sensorG611, engine code CBFA

Golf Mk5

Removing and installing radiator cowl
Removing and installing radiator cowl
Removing
   
–  Pull cover off air duct (release clips on sides) -arrows-.
  A10-10367
–  Unclip air duct at the bottom by releasing clips -arrows-.
  A10-10368
–  Remove bolts -1- at top.
  Note
The left bolt is below the coolant union.
–  Remove noise insulation → General body repairs, exterior; Rep. gr.50
  A19-10146
Tiguan
–  Remove bracket -1- by unscrewing securing bolts -arrows-.
  N10-10238
All
–  Disconnect electrical connector -2-.
–  Remove bolts -3- and take out air cowl downwards.
Installing
Installation is carried out in the reverse order; note the following:
t  Install radiator cowl from underneath.
t  Specified torques → Chapter.
  A19-10146

Removing and installing radiator fanV7 and radiator fan 2V177 > < Installing radiator identification sensorG611, engine code CBFA