–
| Apply silicone sealant -D 174 003 A2- onto clean sealing surface of new cover, as shown in illustration. |
t
| Thickness of sealant bead: 2 ... 3 mm |
Note t
| The cover must be installed within 5 minutes after applying the silicone sealant. |
t
| The bead of sealant must not be thicker than specified, otherwise excess sealant can enter the sump and obstruct the strainer in the oil intake pipe. |
–
| Install cover immediately and tighten bolts: |
Note After fitting cover, let sealant dry for approx. 30 minutes. Only then fill with engine oil. |
–
| Fill up with engine oil. |
Further assembly is basically the reverse of the dismantling sequence. |
|
|
|