A ball valve -2- is located at the bottom of the filler neck in the fuel tank -1-; it must not be damaged by the extraction hose -3-. Therefore push hose into filler neck only as far as marking -arrow-. |
–
| Drain fuel tank as much as possible through fuel filler neck. |
–
| Carefully pull out extraction hose. |
Note t
| When no more fuel is extracted, the tank is emptied just enough for the sender flange to be opened without danger. The tank may be removed while containing remaining fuel. |
t
| Emptying the fuel tank completely → Chapter. |
|
|
|