Golf Mk5
Assembly overview - ignition system |
1 - | Knock sensor 1 -G61- |
q | On front of cylinder head below intake manifold. |
q | Removing and installing → Chapter |
q | Gold-plated contacts. |
2 - | 20 Nm |
q | The specified torque influences the function of the knock sensor. |
3 - | Ignition coil with output stage -(N70, N127, N291, N292)- |
q | Removing and installing → Chapter |
4 - | Spark plug, 25 Nm |
q | Type and electrode gap → Chapter. |
q | Remove and install with spark plug socket and extension -3122 B-. |
5 - | O-ring |
q | Renew |
6 - | Engine speed sender -G28- |
q | At lower left of front cylinder block, next to coarse oil separator → Fig. |
q | Removing and installing → Chapter |
7 - | 10 Nm |
8 - | Hall sender -G40- |
q | In front cylinder head cover. |
q | Gold-plated contacts. |