Note | t
| If an exchange cylinder head is installed, all the contact surfaces between the supporting elements, roller rocker fingers and the running surfaces of the camshaft must be oiled before the cylinder head cover is installed. |
| t
| The plastic packing pieces for protecting the open valves must not be removed until immediately before fitting cylinder head. |
| t
| Renew cylinder head bolts. |
| t
| If the cylinder head is renewed, entire coolant must also be renewed. |
| Removing and installing cylinder head → Chapter |
| Removing and installing toothed belt: |
|
| Golf without split toothed belt guard (BLR, BLX, BLY, BVX, BVY, BVZ) → Chapter. |
|
| Touran without split toothed belt guard (BLR, BLX, BLY, BVX, BVY, BVZ) → Chapter. |
|
| Golf with split toothed belt guard (BVX, BVY, BVZ) → Chapter |
|
| Touran with split toothed belt guard (BVX, BVY, BVZ) → Chapter |
|
|
|
