Golf Mk5
| Part I |
| 1 - | Pulley |
| q | For poly V-belt |
| 2 - | 10 Nm + 90° (1/4 turn) further |
| q | Renew |
| 3 - | 23 Nm |
| 4 - | Transport bracket |
| 5 - | Tensioner for poly V-belt |
| q | Swing with open-jaw spanner to slacken poly V-belt. |
| 6 - | Ancillary bracket |
| q | Observe tightening sequence → Fig.. |
| 7 - | 23 Nm |
| 8 - | 23 Nm |
| 9 - | Alternator -C- |
| q | Removing and installing → Electrical system; Rep. Gr.27. |
| q | To facilitate attachment of alternator, slightly knock back threaded bushes for securing bolts on alternator. |
| 10 - | 45 Nm |
| q | Observe tightening sequence → Fig.. |
| q | Insert with locking fluid. |
| 11 - | Sleeve |
| q | Qty. 2 |
| 12 - | 25 Nm |
| 13 - | Air conditioner compressor |
| q | Removing and installing → Heating, air conditioning system; Rep. Gr.87. |
| 14 - | Poly V-belt |
| q | Mark direction of rotation with chalk or felt pen before removing |
| q | Check for wear. |
| q | Do not kink. |
| q | Removing and installing → Chapter |
|
|
