Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Activated charcoal filter system (Golf) >
< Assembly overview - accelerator pedal module
Golf Mk5
Power unit
4-cylinder injection engine (2.0 l engine, direct injection)
Fuel supply, gas operation
Electronic power control (EPC)
Removing and installing accelerator pedal module
Removing and installing accelerator pedal module
Removing and installing accelerator pedal module
Special tools and workshop equipment required
t
For LHD vehicles: release tool -T10238-
or
t
For RHD vehicles: release tool -T10240-
Removing
–
Remove steering column cover
-arrows-
.
–
Prise out cap
-3-
using a screwdriver.
–
Remove securing bolt
-2-
.
–
Release connector
-1-
-arrow-
and pull off of accelerator module.
–
Push release tool -T10238- into intended holes as shown to stop and remove accelerator pedal module.
Installing
–
Reconnect connector
-1-
to accelerator module
-4-
. Lock connector
-arrow-
.
–
Press accelerator module onto securing pins
-5-
.
–
Insert centring pin
-6-
into hole in floor of vehicle.
–
Secure accelerator module with bolt
-2-
and install cap
-3-
.
–
Install steering column trim.
Specified torques:
Component
Nm
Accelerator module to body
10
Power unit
4-cylinder injection engine (2.0 l engine, direct injection)
Fuel supply, gas operation
Electronic power control (EPC)
Removing and installing accelerator pedal module
Activated charcoal filter system (Golf) >
< Assembly overview - accelerator pedal module