When working on the fuel supply and injection system, pay careful attention to the following “5 rules”: |
t
| Thoroughly clean all unions and adjacent areas before disconnecting. |
t
| Place removed parts on a clean surface and cover. Do not use fluffy cloths! |
t
| Carefully cover opened components or seal if repairs cannot be carried out immediately. |
t
| Only install clean components: Replacement parts should only be unpacked immediately prior to installation. Do not use parts that have not been stored in their packing (e.g. in tool boxes etc.). |
t
| When system is open: do not work with compressed air if this can be avoided. Do not move vehicle unless absolutely necessary. |
|
|
|