Note | t
| Cylinder heads which have cracks between the valve seats or between a valve seat insert and the spark plug thread can be used further without reducing service life, provided the cracks do not exceed a maximum of 0.3 mm in width, or when no more than the first 4 turns of the spark plug thread are cracked. |
| t
| Cylinder head and retaining frame must only be renewed together. |
| t
| After installing camshafts wait for approx. 30 minutes before starting engine. The hydraulic compensation elements must settle (otherwise valves will strike pistons). |
| t
| After working on the valve gear, turn the engine carefully at least 2 rotations to ensure that none of the valves make contact when the starter is operated. |
| t
| Always renew gaskets and seals. |
| Removing and installing camshaft adjuster → Chapter. |
| Removing and installing inlet camshaft control valve 1 -N205- → Chapter |
|
|
|
