| Dismantling and assembling engine |
Caution | The cylinder bore may not be worked on (reboring, honing, grinding) may not be carried out using workshop tools! This will damage the surface of the cylinder bore. |
|
Note | t
| Finding metal shavings or a large quantity of small metal particles during engine repair could indicate that the crankshaft bearings or conrod bearings are damaged. To prevent this from causing further damage, perform the following repairs: |
| t
| Thoroughly clean oil channels. |
| t
| Renew oil filter element. |
| Removing and installing poly V-belt → Chapter |
|
|
|
