Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Power unit | 4-cylinder injection engine (2.0 l engine, turbocharger) | Fuel supply, gas operation | Fuel tank, Golf | Removing and installing fuel tank

Installing

Installation is performed in the reverse sequence. In the process, note the following:

t	To secure the securing straps for the fuel tank, only bolts with loose washers must be used. If different bolts are used, the securing straps might twist during tightening.

t	Install breather and fuel lines free of kinks.

t	Do not interchange supply line and return line (return line blue or with blue marking, supply line black).

t	Ensure wiring/line connections are secured properly by pulling back.

t	Check earth connection on fuel tank and body to filler neck.

t	If fuel delivery unit was renewed, adapt engine control unit to fuel pump → Vehicle diagnostic tester„Guided functions“

Specified torques:

¹⁾ Renew.

Volkswagen Workshop Service and Repair Manuals