volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing engine > < Removing engine

Golf Mk5

Securing engine to assembly stand
   
Securing engine to assembly stand
Special tools and workshop equipment required
t  Lifting appliance -VAS 2024A-
t  Workshop crane -VAS 6100-
t  Engine and gearbox support -VAS 6095-

–  Secure engine on engine and gearbox support -VAS 6095- to carry out repairs.
–  Remove gearbox.
   
–  Attach lifting appliance -VAS 2024A- as follows and lift from engine-/gearbox jack -V.A.G 1383/A- using workshop crane -VAS 6100-.
Pulley end: 3rd hole in hook at position 2.
Flywheel end: 3rd hole in hook at position 8.
  Caution
Use securing pins on hooks and locking pins to avoid damage to engine and vehicle.
t  The positions marked 1...4 on the bar must be towards the pulley end.
t  The holes in the hooks are counted up from the hook.
–  Secure engine to engine and gearbox support -VAS 6095-.
  N10-0149

Installing engine > < Removing engine