Golf Mk5
| Assembly overview - parts of cooling system - body side |
| 1 - | Upper coolant hose |
| q | To connection on cylinder head |
| 2 - | O-ring |
| q | Renew if damaged |
| 3 - | Radiator |
| q | Removing and installing → Chapter |
| q | After renewing, renew entire coolant |
| 4 - | Seal |
| 5 - | Cap |
| q | Check using cooling system tester -V.A.G 1274- and adapter for cooling system tester -V.A.G 1274/9- |
| q | The pressure relief valve must open at a pressure of 1.4...1.6 bar |
| 6 - | Connector |
| 7 - | Screw |
| q | 5 Nm |
| 8 - | Expansion tank |
| q | Test for leaks in cooling system using cooling system tester -V.A.G 1274- and adapter for expansion tank -V.A.G 1274/8- |
| 9 - | Bracket |
| q | For radiator |
| 10 - | Screw |
| q | 5 Nm |
| 11 - | Support |
| 12 - | Nut |
| q | 10 Nm |
| 13 - | Cowling |
| 14 - | Screw |
| q | 5 Nm |
| 15 - | Radiator fan 2 -V177- |
| q | Removing and installing → Chapter |
| 16 - | Connector |
| 17 - | Radiator fan -V7- |
| q | Removing and installing → Chapter |
| q | With radiator fan control unit -J293- |
| 18 - | Lower coolant hose |
| q | To connection for thermostat |
| 19 - | Securing clip |
| 20 - | Radiator outlet coolant temperature sender -G83- |
| 21 - | O-ring |
| q | Renew |