volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing radiator > < Removing and installing thermostat
Removing and installing radiator fanV7 and radiator fan 2V177
Removing and installing radiator fan -V7- and radiator fan 2 -V177-
Removing radiator fan:
–  Remove engine cover.
–  Remove air cowling on lock carrier.
   
–  Remove cowl securing bolts -arrows-.
–  Drain coolant → Chapter.
–  Unclip lower coolant hose on radiator.
  A19-0473
–  Separate electrical connector -1- and unbolt lower cowling securing bolts -arrows-.
–  Remove cowl downwards.
  A19-0473
–  Disconnect electrical connection -1- and free wiring.
–  Remove nuts -arrows- and remove fans.
Installing radiator fan:
Installation is carried out in the reverse order; note the following:
–  Install cowling from below.
Torque settings
  A19-0475
ComponentNm
Radiator fan to cowling10
Cowling to radiator5

   

Removing and installing radiator > < Removing and installing thermostat