volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing camshaft oil seal

Golf Mk5

Removing
Removing
–  Remove toothed belt guard - upper part.
   
–  Turn crankshaft to set camshaft belt pulley to TDC of cylinder no. 1. Marking on camshaft belt pulley must align with arrow on toothed belt guard.
–  Release tensioning roller and remove toothed belt from camshaft belt pulley.
–  Turn crankshaft back slightly.
  A13-0077
–  Remove camshaft belt pulley. When loosening camshaft sprocket, hold with counterhold tool -3415-.
–  Remove woodruff key from camshaft.
–  Screw securing bolt of camshaft belt pulley into camshaft to stop.
–  Screw inner part of oil seal extractor -2085- two turns (approx. 3 mm) out of outer part and lock with knurled screw.
  N15-0454
–  Lubricate threaded head of oil seal extractor -2085-, place it in position and forcefully screw it as far as possible into oil seal.
–  Loosen knurled screw and turn inner part against camshaft until the oil seal is pulled out.
–  Clamp flats of oil seal extractor -2085- in vice. Remove oil seal with pliers.
  A15-0152

Installing > < Renewing camshaft oil seal