volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Active charcoal filter system > < Assembly overview - accelerator pedal module

Golf Mk5

Removing and installing accelerator module
Removing and installing accelerator module
Special tools and workshop equipment required
   
t  Release tool -T10240-
  W00-10108
–  Remove steering column cover -arrows-.
–  Lever out cap → Item using a screwdriver.
–  Remove securing bolt → Item.
  A20-1085
–  Push release tool -T10240- into intended holes as shown to stop and remove accelerator pedal module.
–  Separate electrical connection and pull wire guide off accelerator pedal.
  N20-10056
Installing
–  Push wiring guide -1- and electrical connector -2- onto accelerator pedal.
–  Press accelerator pedal module onto securing pins -6-.
–  Insert centring pin -7- into hole in floor of vehicle.
–  Secure accelerator pedal with bolt -3-, torque setting 10 Nm and install cap -4-.
–  Install steering column trim.
  A20-1088

Active charcoal filter system > < Assembly overview - accelerator pedal module