volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Checking electronic power control (EPC) > < Checking delivery rate
Checking current consumption
Checking current consumption
–  Remove seat bench → General body repairs, interior; Rep. Gr.72.
   
–  Remove cover -1- with fuel pump control unit -J538--2- from fuel delivery unit.
  N20-0603
–  Connect multimeter -V.A.G 1715- to contact 1 -arrow- of 5-pin connector using pick-up clamp.
–  Start engine and run at idling speed.
–  Measure current consumption of fuel pump. Specification: max. 9 amps.
  Note
If the fuel system malfunction is intermittent, you can perform the check during a road test, but a 2nd person is necessary.
If the current consumption is exceeded.
–  Fuel pump is defective. Renew fuel delivery unit → Chapter.
  N20-0402

Checking electronic power control (EPC) > < Checking delivery rate