volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing anti-theft engine control unit

Golf Mk5

Removing
Removing
–  Switch off ignition.
–  Remove wiper arms, plenum chamber cover and plenum bulkhead → Electrical system; Rep. Gr.92.
   
–  Cut into heads of shear bolts so that two parallel surfaces are created -arrows-.
–  Remove bolts with pliers.
  N24-10096
–  Insert a screwdriver between protective housing -A- and retaining plate -arrow-.
  N24-10098
–  Lever up protective housing using screwdriver -A- and pull to side off retaining plate -arrow-.
  N24-10097
–  Release front connector -1- from engine control unit and pull it off.
–  Lever up catch -2- slightly.
–  Then push engine control unit out of retainer -arrow-.
–  Now release rear connector on engine control unit and pull it off.
  N24-10056

Installing > < Removing and installing anti-theft engine control unit