volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Renewing Teflon seal on injector > < Removing

Golf Mk5

Installing
Installing
  Note
t  The Teflon injector seal must not be oiled or lubricated.
t  It is possible that an open inlet valve hinders cleaning. In this case, turn engine by hand using spanner.
   
–  Thoroughly clean holes in cylinder head for high-pressure injectors using nylon brush -T10133/4-.
–  Renew O-ring and Teflon seal for injector → Chapter.
  A24-0589
–  Insert injector in hole in cylinder head to stop using drift -T10133/9-.
  A24-0591
–  Insure correct position of injectors in cylinder head.
  N24-10038

Renewing Teflon seal on injector > < Removing