WARNING | Fuel system is under pressure! Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection. |
| To prevent injuries to persons and/or damage to the fuel injection and ignition system, the following must be noted: |
| t
| Do not touch or disconnect ignition wiring when the engine is running or being turned at starter speed. |
| t
| The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables. |
| Observe following if test and measuring instruments are required during a test drive: |
| t
| Test and measuring instruments must be secured to rear seat and operated by a 2nd person from this location. |
| t
| If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
|
| If the engine is to be turned at starter speed, without starting: |
|
|
|
Note
