volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Assembly overview - cooling system, engine side (vehicles with manual gearbox) > < Removing and installing parts of cooling system
Assembly overview - parts of cooling system, body side
Assembly overview - parts of cooling system, body side
  Note
Coolant hose schematic diagram → Chapter
   
1 - Upper coolant hose
q   From thermostat housing
2 - O-ring
q   Renew if damaged.
3 - Radiator
q   Removing and installing → Chapter.
q   After renewing, renew entire coolant.
4 - Seal
5 - Cap
q   Pressure relief valve must open at between 1.4 and 1.6 bar.
q   Check → Chapter.
6 - Connector
7 - 3 Nm
8 - Expansion tank
q   Checking cooling system for leaks → Chapter.
9 - Retainer
q   For radiator
10 - 7 Nm
11 - Support
12 - 5 Nm
13 - Fan support
q   Removing and installing fan support with fans → Chapter.
14 - 5 Nm
15 - Radiator fan 2 -V177-
q   Removing and installing fan support with fans → Chapter.
16 - Connector
17 - Radiator fan -V7-
q   With radiator fan control unit -J293-.
q   Removing and installing fan support with fans → Chapter.
18 - Lower coolant hose
q   To thermostat housing.
19 - Retaining clip
20 - Radiator outlet coolant temperature sender -G83-
21 - O-ring
q   Renew.

   

Assembly overview - cooling system, engine side (vehicles with manual gearbox) > < Removing and installing parts of cooling system