–
| Set-up valve assembly device -2036- with adapter plates -2036/1- and adjust mounting. |
–
| Screw adapter -T40012- or adapter -T40012/1- into spark plug thread. |
–
| Connect to pressure line with commercially available adapter and ensure a continuous pressure of at least 6 bar. |
–
| Remove valve springs using valve lever -VW 541/1 A- and thrust piece for VW 541 / 1 A and 2037 -VW 541/6-. |
Note Tight cotters can be loosened by tapping lightly on lever. |
–
| Pull off valve stem seals using valve stem seal puller -3364-. |
|
|
|