Golf Mk5
| Assembly overview: anti-roll bar (four-wheel drive, subframe made from aluminium and wheel bearing housing made from cast steel) |
| -Arrow- indicates direction of travel. |
| 1 - | Anti-roll bar |
| q | Note different running gear versions → Chapter, vehicle data sticker. |
| q | Removing and installing → Chapter. |
| 2 - | Mounting |
| q | Always renew mountings/bushes on both sides of vehicle |
| 3 - | Clamp |
| 4 - | Bolt |
| q | 25 Nm + 90° further |
| q | Tighten evenly. |
| q | Always renew after removing. |
| q | Always tighten threaded connections in unladen position → Chapter |
| 5 - | Wheel bearing housing |
| 6 - | Nut |
| q | 45 Nm |
| q | Self-locking |
| q | Always renew after removing. |
| q | When tightening, counterhold on multi-point socket head of bolt → Item or coupling rod → Item |
| 7 - | Bolt |
| 8 - | Coupling rod |
| q | Connects anti-roll bar to trailing arm and wheel bearing housing |
| 9 - | Subframe |