volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing upper transverse link > < Vehicle level sender for vehicles with automatic headlight range control

Golf Mk5

Renew vehicle level sender in vehicle
Renew vehicle level sender in vehicle
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1410-
Removing
  W00-0554
–  Separate connection -1-.
–  Remove bolts -2- from lower transverse link.
–  Remove bolts -arrows- from subframe.
–  Remove rear left vehicle level sender -G76-.
Installing
Install in reverse order. Note the following points:
The lever of rear left vehicle level sender -G76- must face outside of vehicle.
–  Following renewal, carry out basic setting of headlights → "Guided fault-finding" function of vehicle diagnosis, testing and information system VAS 5051.
  N42-10328
Specified torques
ComponentSpecified torque
Rear left vehicle level sender -G76- to lower transverse link and subframe5 Nm

   

Removing and installing upper transverse link > < Vehicle level sender for vehicles with automatic headlight range control