Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Vehicle electrics | Communication | Infotainment | Aerial systems | Removing and installing amplitude modulation (AM) frequency filter

Removing

Before beginning dismantling work, perform the following steps:

–	Switch off ignition and all electrical consumers and remove ignition key.

–	To remove frequency filter, the rear lid trim must be removed → General body repairs, interior; Rep. Gr.70.

–	Remove securing bolts -arrows-.

–	Release and disconnect the three connectors. To do this, pull off slightly red clip -A- from each connector and release catch located behind.

–	Remove frequency filter.

Volkswagen Workshop Service and Repair Manuals