volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking alarm hornH12 > < Alarm hornH12

Golf Mk5

Removing and installing alarm hornH12
Removing and installing alarm horn -H12-
Special tools and workshop equipment required
   
t  Drill -VAS 5134-
t  Twist drill bit Ø 6 mm
  W00-1052
t  Pop rivet pliers -VAS 5072-
  Note
The anti-theft alarm must be deactivated → Chapter before removing the alarm horn.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove front right wheel housing liner → General body repairs, exterior; Rep. gr.66.
  W00-1237
–  Use drill -VAS 5134- and a 6 mm Ø drill bit to drill out both pop rivets -arrows-.
  N96-10286
–  Pull alarm horn -H12--1- in direction of -arrow- out of body aperture.
–  Pull off connector -2-.
Installing:
  Note
Remove all metal swarf produced by drilling.
–  Take the necessary anti-corrosion measures → Rep. gr.Allgemeine Hinweise.
–  Connect connector to alarm horn -H12-.
  N96-10287
–  Guide clip -2- of alarm horn -H12--3- into body aperture -1-.
–  Secure alarm horn -H12- using pop rivet pliers -VAS 5072-.
  N96-10288

Checking alarm hornH12 > < Alarm hornH12