–
| Turn bulb holder with front turn signal bulb-1- in direction of arrow and remove from headlight. |
–
| Push front turn signal bulb into bulb holder, turn front turn signal bulb anti-clockwise and pull front turn signal bulb out of bulb holder. |
Caution When installing cover cap, ensure cap is seated correctly. The ingress of water will lead to permanent damage to the headlight. |
|
Note Do not touch bulb glass when fitting bulbs. Fingers leave traces of grease on the glass, which evaporate when the bulb is switched on and cause the glass to cloud over. |
Installation is carried out in the reverse order. When installing observe the following: |
–
| Check headlight functions. |
|
|
|