volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing steering column switch base > < Removing and installing turn signal switch
Removing and installing windscreen wiper switchE
Removing and installing windscreen wiper switch -E-
  Caution
The removal and installation of individual components of the steering column switch must be performed in a specified sequence → Chapter.
Removing:
  Note
For reasons of clarity, the steering column switch is shown in the removed state.
   
–  Release retaining clips -arrows- using 1.0 mm feeler gauge -1- and remove wiper switch -E- towards rear of vehicle.
Installing:
Installation is carried out in the reverse order. When installing observe the following:
  Note
The windscreen wiper switch -E- should be heard to engage.
  A94-0630

Removing and installing steering column switch base > < Removing and installing turn signal switch