volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 103 kW and 125 kW > < Removing and installing starter, dual clutch gearbox (DSG)

Golf Mk5

Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 90 kW
Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 90 kW
Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 103 kW and 125 kW → Chapter
   
Special tools and workshop equipment required
t  Torque wrench -V.A.G 1331-
t  Torque wrench -V.A.G 1332-
t  Spring-type clip pliers -VAS 5024-

Removing:
–  Disconnect battery → Chapter.
–  Remove air filter housing → Power unit; Rep. gr.24.
   
–  Release and disconnect connector -1-.
  N27-10478
–  Slide protective cap -1- off solenoid switch in direction of -arrow-.
  N27-10479
–  Unscrew securing nut -1- and remove positive wire -2- from connector thread of solenoid switch.
  N27-10480
–  Remove upper securing bolt of starter -arrow-.
  N27-10690
–  Remove lower securing bolt of starter -arrow-.
–  Remove starter -1- from vehicle upwards.
Installing:
Install in the reverse order of removal. When doing this, note the following:
–  Tighten threaded connections to specified torques → Chapter.
  N27-10691

Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 103 kW and 125 kW > < Removing and installing starter, dual clutch gearbox (DSG)