volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Vehicles with 3.2 l injection engine and dual clutch gearbox (DSG) > < Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 103 kW and 125 kW

Golf Mk5

Vehicles with 2.0 l FSI turbocharged engine and dual clutch gearbox (DSG)
   
Vehicles with 2.0 l FSI turbocharged engine and dual clutch gearbox (DSG)
Special tools and workshop equipment required
t  Torque wrench -V.A.G 1331-
t  Torque wrench -V.A.G 1332-
t  Spring-type clip pliers -VAS 5024-

Removing:
–  Disconnect battery → Chapter.
   
–  Remove securing bolts -arrows-.
  N27-10270
–  Disconnect connector -arrow-.
  N27-10271
–  Loosen spring-type clips -arrow- using spring-type clip pliers -VAS 5024-.
  N27-10272
–  Pull engine cover panel upwards -arrows-.
  N27-10273
–  Slide protective cap in direction of -arrow- off solenoid switch.
  N27-10117
–  Unscrew positive wire -1- and disconnect connector from terminal 50 -2-.
  N27-10118
–  Remove upper securing bolt of starter -arrow-.
  N27-10237
–  Remove lower securing bolt of starter -arrow-.
–  Remove starter from vehicle upwards.
Installing:
Install in the reverse order of removal. When doing this, note the following:
–  Tighten threaded connections to specified torques → Chapter.
  N27-10238

Vehicles with 3.2 l injection engine and dual clutch gearbox (DSG) > < Vehicles with 1.4 l TSI engine and dual clutch gearbox (DSG), 103 kW and 125 kW