Vehicle electricsWindscreen wiper system
Caution | When batteries are disconnected and reconnected, the procedure described in the workshop manual must be strictly observed → Chapter. |
|
Note | The wiper motor control unit -J400- and the windscreen wiper motor -V- are combined to form one unit. |
|
|
|
| To remove the wiper blades, the wiper arms should be placed in the „service/winter position“. The „service/winter position“ is activated within 10 seconds after ignition is switched off by pressing windscreen wiper lever in „tip wipe“ position → Operating manual of vehicle. |
| Fault detection and fault display: |
| The onboard supply control unit -J519- features self-diagnosis to facilitate fault finding. |
| For fault finding, use vehicle diagnosis, testing and information system -VAS 5051A- in „Guided fault finding“ mode. |
|
|
|
03 General
