| Battery tester with printer -VAS 5097 A- |
WARNING | Danger of injury! Observe warning notices and safety regulations → Chapter! |
|
| It is not necessary to remove or disconnect battery when using battery tester with printer -VAS 5097 A-. |
| Battery tester with printer -VAS 5097 A- can be used to test 12 V starter batteries. |
| t
| 80 - 520 A cold cranking current according to DIN (Deutsche Industrie Norm (German Industrial Standard)) → Remark |
| t
| 95 - 574 A cold cranking current according to IEC (International Engineering Consortium) |
| t
| 136 - 855 A cold cranking current according to EN/ SAE (European Norm/Standard of Automotive Engineers) |
| 1)
| Batteries with cold cranking current higher than 499 A according to DIN (e.g. 520 A, 580 A or 600 A) can be temporarily tested using setting for 499 A according to DIN. |
| For test purposes the battery is loaded with a current which is similar to the starting current required to start the vehicle. The battery is assessed on this loading and the result is printed out. |
Note |
|
|
