Golf L4-1.8L Turbo (AWW) (2003)
^
Slide headliner forward.
^
Remove rear screw arrow on left/ right sides. Pull slide forward over stop (item 1 illustration A600018).
^
Install in reverse order of removal.
Ensure slide is square to sliding headliner and guide rail.
Torque = 3.5 Nm (31 in. lb).
Warranty
* Code per warranty vendor code policy.
Required Parts and Tools
Tip:
Part number(s) are for reference only. Always see your Parts Dept. for the latest part(s) information.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.