Golf L4-1.8L Turbo (AWW) (2003)
-
VAS 1978 Wiring harness repair set
Removing
-
Obtain radio code on vehicles with coded radio.
-
Disconnect battery
-
Disconnect wheel speed sensor wiring connector.
-
Remove rear interior side panel trim.
-
Strip insulation (arrow) from shrink connection.
-
Cut speed sensor wiring in front of spliced connection with stripping pliers from VAS 1978 wiring repair kit and remove faulty wiring.
-
Strip insulation at wiring end by 15 mm (5/8 inch) using stripping pliers from repair kit and fold over stripped wire portion.
-
Install new speed sensor wiring.
-
Connect wheel speed sensor to speed sensor wiring.