Golf L4-1.8L Turbo (AWW) (2003)
Special tools, testers and auxiliary items required
-
Refractometer T10007
-
Drip Tray V.A.G 1306 or Drip Tray for VAS 6100 VAS 6208
-
Torque wrench V.A.G 1331
-
Spring-type clip pliers VAS 5024A
Removing
Note: Always replace gaskets and seals.
-
Drain coolant.
-
Disconnect coolant hose from connecting piece - 3 -.
-
Remove bolts - 4 - from connecting piece - 3 - and remove connecting piece - 3 - with thermostat - 1 -.
Installing
Installation is in reverse order of removal, note the following:
-
Moisten new O-ring - 2 - with coolant.
-
Insert thermostat in - 1 - connecting piece - 3 - and turn 1/4 (90°) to right.
-
Insert connection - 3 - with thermostat - 1 - into engine block.