Golf L4-1.8L Turbo (AWW) (2003)
-
Connect test box to control module wiring harness.
-
Check wire between test box socket 115 + 2-pin connector terminal 2 for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohms
-
Check wires for short circuit to B+ and Ground (GND).
Specified value: Infinite Ohms
-
Check wire between 2-pin connector terminal 1 and the Fuel Pump (FP) Relay -J17- for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohms
If resistances and wires are OK.
-
Replace Motronic Engine Control Module (ECM) -J220-.