Golf L4-1.8L Turbo (AWW) (2003)
7- 60 Nm plus an additional 1/4 turn (90°)
Replace
8- Flywheel/drive-plate
To remove and install flywheel counterhold with 3067
Removing and installing drive plate, refer to Drive Plate, Removing and Installing See: Transmission and Drivetrain/Flex Plate
9- Intermediate plate
Must be located on dowel sleeves
Do not damage/bend when assembling
10- Sealing flange with oil seal
Only replace as complete unit
To remove and install, remove oil pan.
Before installing, remove oil residue from crankshaft journal using a clean cloth
Do not additionally oil or grease the oil seal sealing lip
Use protective sleeve supplied when installing
Remove protective sleeve first after sealing flange has been slid onto crankshaft journal