Golf L4-1.8L Turbo (AWW) (2003)
-
Align marking on camshaft gear with marking on cylinder head cover.
-
Place toothed belt onto crankshaft sprocket (observe direction of rotation).
-
Install engine bracket on cylinder block. Torque specification 45 Nm
Note:
Before installing engine bracket, insert bolts in bracket.
-
Install toothed belt cover - lower part. (Insert bolts with Locking Compound D 000 600 A2.) Torque specification: 10 Nm
-
Using a bolt, secure vibration damper/belt pulley (watch locating point).
-
Turn crankshaft to set cylinder 1 at TDC.
-
Position toothed belt on coolant pump, tensioning roller and camshaft gear.
-
Tension toothed belt.
B - Toothed belt only removed from camshaft gear