Golf L4-1.8L Turbo (AWW) (2003)
-
Check wiring for open circuit between 4-pin connector contact 1 and current supply relay for Motronic (main relay) using wiring diagram.
Wire resistance: max. 1.5 Ohm
-
Check wiring between 4-pin connector and Ground for open circuit using wiring diagram.
Contact 2 and Ground
Contact 4 and Ground
Wire resistance: Max. 1.5 Ohm
If there is no fault in the supply voltage:
-
Check activation.
Checking activation
WARNING!
During the following test do not touch the connecting parts of the ignition coils or test cables.
-
Remove fuse 32
NOTE: Removing fuse 32 interrupts the voltage supply to the injectors.