Golf L4-1.8L Turbo (AWW) (2003)
Transmission Position Switch/Sensor: Service and Repair
5 Speed Automatic 09A
Multi-function transmission range (TR) switch -F125-, removing, installing and adjusting
Special tools and equipment
-
T10091 Adjusting device
-
V.A.G 1331 Torque wrench or equivalent
Removing multi-function TR switch
-
Check whether a coded radio is installed. If so, obtain anti-theft coding.
-
Switch ignition off and disconnect battery Ground strap.
-
Install battery.
-
Remove battery carrier.
-
Shift selector lever into "P" position.
-
Remove nut -arrow-.
-
Pull lever -1- off selector shaft.
-
Pull off multi-function switch connector
-
Remove multi-function TR switch (F125)
Installing and adjusting multi-function TR switch