Golf L4-1.8L Turbo (AWW) (2003)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley With Freewheel, Removing and Installing
Ribbed Belt Pulley With Freewheel, Removing And Installing
Installing ribbed ribbed belt pulley with freewheel
Special tools, testers, measuring instruments and auxiliary items required
-
VAG 1332 Torque wrench (40 - 200 Nm)
-
3400 Multi-spline adapter
-
First remove existing ribbed belt pulley.
-
Insert multi-spline adapter 3400 in freewheel disc.
-
Screw freewheel disc by hand onto generator drive shaft onto stop.
The torque wrench must be rearranged before installing the freewheel disc as follows: