Golf L4-1.8L Turbo (AWW) (2003)
^
Turn overcenter spring together with assembly device T10111 in direction of arrow -A- and take out downward in direction of arrow -B-.
Installing
^
Pull clutch pedal toward inside of vehicle.
^
Install overcenter spring together with assembly device T101 11 in direction of arrow -A- into support. When doing this turn in direction of arrow
-B-.
^
Install overcenter spring on support in rear -arrow A-.
^
Press clutch pedal to bulkhead until overcenter spring lies against clutch pedal bearing tab -arrow B-.
^
Make pedal recede even more, until it is in rest position, and remove assembly device.
^
Install cover/lower drivers side.
Clutch Pedal, Removing and Installing
Clutch pedal, removing and installing
Special tools and equipment
^
T10005 Pliers