Golf L4-1.9L DSL Turbo (BEW) (2004)
Ignition Lock Cable: Service and Repair
Removing and installing locking cable for ignition with key withdrawal lock
Only vehicles with automatic transmission
Adjust locking cable
Removing
-
Remove steering wheel
-
Remove trim for steering column switch
-
Shift selector lever into position "P" if necessary.
-
Turn ignition key - A - to "ignition on" position.
-
Press wire clip -1 - up or down according to installation position and pull at the same ignition lock cable - 2 - out at the same time.
Installing
-
Shift selector level into "P" position.
-
Turn ignition key - A - to "ignition on" position.
-
Push lock cable - 2 - into steering lock housing until wire clip -1 - engages.