Golf L4-1781cc 1.8L SOHC (ACC) Can (1993)
Hood Latch Release Cable: Service and Repair
Hood, assembly, Hood lock cable, removing and installing
WARNING!
-
Do not re-use fasteners that are worn or deformed in normal use.
-
Some fasteners are designed to be used only once, and are unreliable and may fail if used a second time. This includes, but is not limited to, nuts,
bolts, washers, cirdips and cotter pins. Always follow recommendations in this manual- replace these fasteners with new parts where indicated, and
any other time it is deemed necessary by inspection.
1 - Release lever
-
Cable attached
2 - Self-tapping screw
3 - Sealing grommet
4 - Clip
5 - Cable
6 - Lock
-
Cable attached
7 - Self- locking bolt
-
Always replace
-
l4Nm (10 ft lb)
8 - Spreader clip
Removing