Golf L4-1781cc 1.8L SOHC (ACC) Can (1993)
- Press piston cap with intermediate spring ring down far enough for circlip (-arrow-) to be inserted in groove.
Fitting thrust plate and plates onto inner plate carrier
- Install thrust plate -a- with smooth side facing inner plate and stepped side towards inner plate carrier.
- Install 3 inner plates -b- and 2 outer plates -c-.
- Insert supporting ring with step (-arrow-) after installing thrust plate as well as inner and outer plates.
Note:
Locate locating lugs correctly.
Installing corrugated washer and inner and outer plates in clutch housing
- First insert corrugated washer.
- Insert 2 mm thick outer plate.
- Insert remaining inner and outer plates.
Inserting inner plate carrier and installing circlip (-arrow-).