Golf L4-1781cc 1.8L SOHC (ACC) Can (1993)
7. Hook attachment parts onto release shaft lever (image shows vehicle without balance weight).
8. Suspend the clutch cable in wire holder.
9. Install the over-center spring. See: Clutch Pedal Assembly
10. Remove the retaining strap.
11. Check the operation of the adjustment mechanism. Refer to Clutch Cable Adjustment Mechanism, See: Adjustments
NOTE: No other cable (throttle cable, etc.) is to be attached to the clutch cable using a tie strap or any other type of securing device. This could
result in the clutch cable failing to operate properly.