Golf L4-1781cc 1.8L SOHC (ACC) Can (1993)
Fig. 1 - Suspension Strut To Body, Loosening/tightening
Fig. 2 - Ball Joint/Control Arm, Separating
-
Mark position of ball joint on control arm.
-
Remove bolts, arrows -A-, and swing wheel bearing housing aside to remove left side axle shaft.
-
Loosen bolt, arrow -B-.
Fig. 3 - Wheel Hub, Pressing Out Of Wheel Bearing Housing
Fig. 4 - Wheel Bearing Inner Race, Pulling Off Wheel Hub
-
Only use commercial puller with tensioner, e.g. Kukko tool No. 204-2, or equivalent.