Golf L4-1781cc 1.8L SOHC (ACC) Can (1993)
-
Assembling 3rd/4th gear operating sleeve and synchronizer hub
^
Slide operating sleeve over synchronizer hub keeping the recesses for locking keys in synchronizer hub and operating sleeve in alignment
^
Insert locking keys and install springs at 120° offset. Angled ends of each spring must engage in hollow keys
-
Installation position of 3rd/4th gear operating sleeve and synchronizer hub
^
Operating sleeve and synchronizer hub must be installed with chamfer on inner splines of hub (arrow) toward 3rd gear
-
Pressing on 3rd/4th gear operating sleeve and synchronizer hub